点击图片查看原图
[全球VIP第11年] 指数:2
中国区伙伴ACEA（欧洲汽车制造商协会）认证，标准为A3/B3/B4
1. 提供各种条件下可靠的发动机保护，可在极端条件下使用;
2. 可在普通城市和越野条件下使用;
3. 由于其流动性降低了油耗;
4. 多功能添加剂大大延长发动机使用寿命，具有优良的耐低温、耐磨、防腐、清洁剂和抗氧化性能;
5. 保持最长效果，显著延长换油周期;
6. 由于优异的粘度/温度特性，提供了冬天低温下安全的发动机起动，包括冬季天气条件恶劣的区域;
7. 就石油消耗、波动性以及节能环保等方面符合世界各国在设备制造方面占据领先地位制造商的要求;
8. 使用先进技术，并在LUBRIZOL®公司的控制下生产 -，LUBRIZOL®公司为全球领先的润滑油生产公司。
|
100˚С的运动粘度，mm²/s
|
12,5
|
|
20˚С的密度, kg/m³
|
860
|
|
粘度指数
|
150
|
|
碱度, mg KOH/g
|
9,75
|
|
开放容器中的闪点, ˚С
|
210
|
|
倾点, ˚С
|
-33
|
更多优质货源请访问中国进出口网
Synthetic High-Tech motor oil.
Intended for modern gasoline and diesel engines of passenger cars and vans from Japan and US carmakers.
Produced of high-quality synthetic base oils with additives, providing high performance of engine within a wide temperature range and extending its service life.
Provides improved safety as compared to mineral and semi-synthetic oils.
Special low-ash formula. Has an extended drain interval. Compatible with injector and multivalve engines, including turbocharged ones, with intercooler and catalyst.
|
Compliance
|
|
SAE 5W-30
API SM/CF
ACEA A3/B3/B4
VW 502.0/505.00
MB 229.3
BMW LL-01
Opel GM-LL-025
|
|
-31˚С
|
0 ˚С
|
+40˚С
|
Enabled packing
- Provides a reliable engine protection under various conditions incl. extreme operating mode;
- Optimum for the use both in urban cycle and cross-country conditions;
- Due to its fluidity reduces fuel consumption;
- Significantly extends engine service life due to multipurpose additives package, with excellent low temperature, antifriction, anticorrosion, detergent and antioxidant properties;
- Maintains effectiveness for maximum long period, which allows to extend significantly oil drain intervals;
- Due to superior viscosity/temperature properties, provides safe engine start at low temperatures in winter, including the regions with harsh weather conditions in winter;
- Conforms to modern requirements of world leaders in equipment manufacture concerning oil consumption, volatility, energy saving;
- Produced using the technology and under control of LUBRIZOL® corporation – the world leader in the field of lubricant components manufacture.
|
Typical characteristics |
|
|
Kinematic viscosity at 100˚С, mm²/s
|
12,5
|
|
Density at 20˚С, kg/m³
|
860
|
|
Viscosity index
|
150
|
|
Alkalinity, mg KOH/g
|
9,75
|
|
Flash point in open crucible, ˚С
|
210
|
|
Pour point, ˚С
|
-33
|
