纳米涂层-用于玻璃和瓷器 nanocoating

设计该涂层的主要目的是，使和玻璃一样光滑的物体表面尽量少的接触到灰尘颗粒。（中国进出口网）

该产品疏水疏油，可使污染物颗粒，如油脂，油，石灰和环境污染物较少的附着基质，还可以使人们不施加摩擦剂就可以很容易地从涂层表面除去这些污垢（“易清洁”效应）。

使用范例：
卫生间的玻璃物体表面（花洒，镜子）
釉面陶瓷表面（厕所，水槽，釉面砖）
窗户玻璃+建筑玻璃（玻璃暖房，高层建筑）
汽车玻璃（前窗侧窗）
太阳能电池板

产品特点：
强疏水性
强抗粘性
轻松去除玻璃陶瓷上的污垢，石灰

其它性能：
透明液体（涂层厚度：100〜150 毫微米）
永久（防紫外线，非常耐磨损）
不会有温度变化
操作简单（可自己动手）
耐化学物质（pH值13或14的化学物质除外）

用法：
该产品操作简单，同样适用于终端消费者使用：
1.手动：干净的纸，亚麻或微纤维布，圆周运动
2.工业：涂层抛光，或涂层喷洒，HVLP喷涂

在距离物体表面10cm处喷洒。
此二氧化硅涂层喷洒后24小时固化。易清洁效果只能在硬化后进行测试。
施加该涂层前，一定要彻底清洁物体表面！

贮存：
未开封原装容器纳米涂层可以储存至少2年。
建议储物架和运输温度：3℃〜30℃

喷涂面积：
手动：5 - 10 ml/㎡
工业：10- 15 ml/㎡

和其他产品相比，nanoblo®二氧化硅涂层的竞争优势：
•持久性及其寿命：紫外线稳定性确保其功效达数年之久，接近于涂覆表面寿命
而其他涂层会在阳光下慢慢损耗
•耐磨及易清洁效应：基质施加纳米涂层后，耐磨性能良好。而许多和我们竞争的产品，施加后，会很容易的磨损掉。
•化学性能稳定：该产品耐清洗剂（几乎所有的家庭用及工业用洗涤剂，浓缩碱液除外）。
而许多和我们竞争的产品并不具备该特点，在清洁后必须重新施加

包装：
250毫升和500毫升，罐装，用于商业用途；5升和更大的罐装纳米涂层，则为工业使用。


This coating was designed to enable smooth, glass-like surfaces to have less contact with dirt particles.

The hydro- and oleophobic effects cause particles of contamination such as grease, oil, lime and materials from environmental pollution to adhere less to the substrates, and allow them to be easily removed from the coating, i.e. without applying abrasive agents ("Easy-clean" effect).

Examples of use:
Glass surfaces in sanitary areas (showers, mirrors)
Glazed ceramic surfaces (toilets, sinks, glazed tiles)
Window glass + construction glass (conservatories, high-rise buildings)
Automotive glass (front + side windows)
Solar panels

Product characteristics:
Strong hydrophobicity
Strong anti-stick properties
Excellent easy-clean performance on contamination and lime-scale

Other properties:
Invisible to the human eye (coating thickness: 100-150 nm)
Permanent (UV-stable, enormous abrasion-resistance)
Resistant to temperature change
Simple application (do-it-yourself)
Chemical-resistant (except for pH value of 13 or 14)

Application:
Simple do-it-yourself application makes it suitable for end-customers as well:
1. Manual: Application with circular motion using a clean paper, linen or microfibre cloth.
2. Industrial: Available as polish-coat systems or spray-coating systems, HVLP sprayers.

Spray the surface form a 10cm distance.
This SiO2-coating is completely networked and hardened after 24 hours. The easy-clean effect can only be tested after this hardening phase.
Stains that may have been left on the surface before the coating procedure will be trapped on the surface by the coating.
ALWAYS COAT CLEAN SURFACES!!!

Storage stability:
Unopened original containers can be stored for at least 2 years.
Recommended storage- and transport temperature: +3 to 30 oC

Consumption:
Manual: 5-10 ml/m2
Industrial: 10-15 ml/m2

Advantages of nanoblo® SiO2 coatings in comparison with competitive products:
• Permanence and longevity: UV-stability enables functionality for a number of years, approximately the lifetime of the coated surface
Many competitive products are damaged slowly by sunlight
• Abrasion-resistant easy-to-clean effect:
A permanent chemical bond with the substrate enables excellent abrasion resistance. Many competitive products can be easily removed by abrasion.
• Chemical stability: The product is resistant to almost all standard household and industrial cleaners (with the exception of concentrated lye).
Many competitive products must be reapplied after cleaning the surface.

Packaging:
The product comes in canisters of 250 ml and 500 ml for commercial use and in 5 liter and bigger canisters for industrial use.